• 1 Open System Preferences.

  First, open the System Preferences by going to the Apple menu and choosing System Preferences. Or choose System Preferences from the Dock. And click on the Network system preference.

  

• 2 Start configuration

  In the Network system preference there is a list of network connections on the left side. Click the + icon in left bottom corner to make a new connection for the TopVPN.

  

• 3 Choose Interface

  In the next window click on the Interface popup menu to see the list of choices and select VPN from the list

  

• 4 Choose protocol

  From VPN Type dropdown manu choose the L2TP over IPSec protocol.

  

• 5 Enter Service Name

  Next, set the Service Name to TopVPN and click Create (see below).

  

• 6 Create configuration name

  If you've set the VPN up before, you may see configurations in the list. Be sure to click Add Configuration... from the Configuration dropdown menu to add a TopVPN configuration.
  
  TIP: You can use this option to add more locations just by changing the Server Address
  ( check out step 13 )

  

• 7 Enter configuration name

  In the next window, enter TopVPN for the configuration name. Then click Create.

  

• 8 Enter login information

  In Server Address enter one of our server address. Check out МРЕЖАТА НА TopVPN
  In Account Name enter your TopVPN USERNAME
  Select the checkbox to show the VPN status in your menu bar
  Click on Authentication Settings ...

  

• 9 Enter you password

  In this window tick the Password field and enter your TopVPN account password. Then add our preshared secret key: "mytopvpn" ( whitout quotes ) and click OK

  

• 10 Advanced settings

  Next, we'll need to adjust some of the advanced VPN settings. To do that, first click the Advanced... button. See the screen below for its location.

  

• 11 Check for Send all traffic over VPN connection

  For the VPN to work effectively, the Send all traffic over VPN connection checkbox should be marked. Make sure the checkbox is checked. Click the DNS tab from the advanced settings menu.

  

• 12 Change DNS servers (optional)

  Click on the + in the bottom left corner and add the folowing DNS servers 8.8.8.8 and 8.8.4.4 this will bypass any DNS blockades from your ISP. After adding them click OK

  

• 13 Add multiple locations (optional)

  If you like to add multiple locations you will need to create new configuration and do the same steps from step 6. All you need to change is just the Server Addres. You can add any of the host addresses listed in our МРЕЖАТА НА TopVPN

  

• 14 Finish & Connect

  Once you're done with everything just Apply all the settings and then click Connect

  

• 15 Successuful connection and tray management

  When you establish successuful connection with our servers, all your network traffic will be routed trough our VPN service and green status bars will go up and down as you make some network traffic.

  

  Also you can easly connect, disconect or switch between our VPN locations from the menu bar on your MacOS.

  

Повеќе уреди